• Featured Event: 

  • space_example.JPG
    • 1.png
    • 2.png
    • 3.png
    • 4.png
    • 5.png
    • 6.png
  • CNC Machine Operators

    AKG North American Operations Inc.
    Job Description
    CNC Machine Operator Operates the CNC machine to produce tanks, based on the work order and blueprint instructions. 

    Tasks and Responsibilities
    • Read and understand detailed work order instructions and blueprints.
    • Set up the cycle time on the machine, when starting the shift.
    • Compare work orders with the tanks provided, load the monitor with this order information.
    • Manually load the CNC machine with the aluminum raw material, and operate the machine.
    • Monitor and periodically check the machine to make sure it is running properly, check the tanks to make sure they are being produced within quality standards.
    • Attach helical coil to the tank if indicated on the work order instructions.
    • De-burr the tanks after they have been cut in the CNC machine.
    • Document and label the finished tanks.
    • Position the tanks in the weld prep machine, and make adjustments to the machine to tighten the tanks in place.
    • Operate the weld prep machine to cut and bevel the sides of the tanks.
    • Position the tanks into the corner cutting machine, if needed, and bevel the corners of the tanks.
    • Fill the carts with finished tanks, and manually push those carts to the designated storage area.
    • Meet the production quotas that were received from the Lead or Supervisor. 
    • Report any issues to the Supervisor, or appropriate personnel, as soon as detected.
    • Adhere to all policies, procedures, and/or requirements set forth in AKG’s environmental management system (EMS).
    • Regular physical attendance is a requirement for this position. Refer to AKG attendance policy in the Information Handbook for Employees.
    Job Qualifications
    • Experience as a Machine Operator in a manufacturing environment. 
    • Must have basic mathematic skills, along with the ability to use and understand measuring tools. 
    • Must be available and able to work the agreed upon shift.
    • Must have great attention to detail.
    • Must be able to stand (95%) and walk (5%) of the time. May also be required to bend, stoop, pull, push, twist and turn. 
    • Must be able to lift up to 25lbs (10%) of the time.
    -       Must wear safety equipment PPE such as steel toe shoes, safety glasses and gloves. 
    Reports to:  Supervisor
    Starting Date: As available
     
    Contact Information
  • Mitchell Events
  • Upcoming Events

     
  • Mitchell Area Chamber of Commerce